Tall Panel Gate

Our Tall Freestanding Pet Gate Panel is a clean, modern freestanding pet gate for openings 48" or less.The panel gates have a clear hinge in the center that makes the panel easy to store away when not in use. The 30, 32 and 36" gates have a single 24" long base. The larger 42" and 48" come with (3) lucite feet that screw tight to the panel. With laser cut handles to maneuver the panel, this freestanding pet gate is pure modernity. Each gate is 30" high and comes with stick on floor protectors to prevent wood floor scratching.

The larger 42" and 48" have a hinged panel with (3) lucite feet that screw tight to the panel. With laser cut handles to maneuver the panel, this freestanding pet gate is pure modernity. Each gate is 30" high and comes with stick on floor protectors to prevent wood floor scratching.

Note when ordering: If you want to ensure your pet cannot push the gate open, order a gate that is 3–4 inches wider than your opening. This allows the gate to be positioned against the side walls. The overlap with the walls makes it much harder for pets to push the gate.

Included:
1/4" thick acrylic panel gate
3/8" thick acrylic base for the 30", 32" & 36" gate
3/8" thick (3) acrylic feet for the 42" & 48" gate
Self-adhesive clear rubber feet on bottom for use on hardwood or tile floors.

Key Features

-Freestanding pet gate in 5 sizes: 30", 32", 36", 42" and 48" wide.
-Easy set up, put panel in base and you're done.
-The 30, 32 and 36" wide gates have a single, 1/2" thick lucite base that helps prevent dogs from pushing the gate.
-The 42 and 48" gates have 3 feet that hold the panel securely upright and help prevent the dogs from pushing the gate.
-At 30" tall, barricades dogs of all sizes.
-Perfect for top or bottom of stairs.
-Can be used inside or outside.
-Comes with clear floor protectors.
-Note when ordering: If you want to ensure your pet cannot push the gate open, order a gate that is 3–4 inches wider than your opening. This allows the gate to be positioned against the side walls. The overlap with the walls makes it much harder for pets to push the gate.
-30", 32" and 36" gates ship in 1-2 days.
-42" and 48" gates ship in 1 week.

Size & Capacity

Sizes: 30, 32, 36, 42 and 48" wide.

Dimensions:
30" gate: 30"w x 30"h x 8"d (weight 18 lbs.)
32" gate: 32"w x 30"h x 8"d (weight 20 lbs.)
36" gate: 36"w x 30"h x 8"d (weight 22 lbs.)
42" gate: 42"w x 32"h x 8"d (weight 26 lbs.)
48" gate: 48"w x 32"h x 8"d (weight 28 lbs.)

30", 32" and 36" Gates have a single base:
Base Dimensions: 24"w x 4"h x 8"d
(for 30, 32 and 36" gate)
42" and 48" Gates have (3) feet:
Foot Dimensions: 7.5"w x 6.5"h x 10"d

Note: 1/4" to 1/2" tolerance is possible with dimensions and is not considered defective.

Use & Care

30, 32 & 36" Gate Assembly:
-Place panel down into base.

42 and 48" Gate Assembly:
-Open the gate so it lays flat.
-Place (2) feet towards either end of panel and place 3rd foot at center of panel.
-Tighten the thumbnail screw until it holds the panel upright and in place. There are no screw holes on the panel; the screw just tightens to the panel.

Care Instructions:
-Indoor or Outdoor Use.
-Wipe with soft cloth and soapy water.
-Do not use any chemical cleaners.
-NOT TO BE USED AS A CHILD GATE.

Assembly Instructions

Important for proper set up:
The gate and base should be positioned on the same side of the doorway or opening as the pet so that the pet cannot push the gate thru the opening.

Assembly Instructions for 30", 32" & 36" gates:
1. Remove large acrylic panel and separate T-shaped base, from box.
2. Place T-shape base in the center of the doorway/hall opening that you want to barricade.
3. Slide large panel down into base; adjust gate as needed to adequately block your opening.

Assembly Instructions for 42" and 48" gates:
1. Open the hinged gate panel so it lays flat.
2. Place 1 foot towards end of each panel; these are the end feet.
3. Place 3rd foot at center of panel.
4. Secure all 3 feet by tightening the thumbnail screw until it holds the panel upright and in place. There are no screw holes on the panel; the screw just tightens to the panel.